Ready to use! All you need is an enclosure like a shower or closet. You will need to install a hanging hook or a proper hanging method for safe use.
Made of cedar wood and non-toxic glueNo paints or finishesTested for EMFs to ensure you are EMF free at the 18″ recommended distance Easy to reach on-off switch (We chose a toggle switch because we wanted something that’s not PVC plastic on the surface)Porcelain light socketsUL Listed parts and wiringSteel cages (Polished brass galvanized) Cages are grounded to the ground plug for safety
4 Philips 250 watt heat lamps (They get Hot!)
Weight 14 poundsHooks on back for hangingCarry handle 10 ft. Power CordDimensions: 23.5″ X 23.5″ x 9″1 Year limited warranty on parts and manufacturing
Our lovely handcrafted near
infrared sauna is lightweight. Hang it from the chain (included) or mount it on
a wall with the hangers on the back. It is designed to even sit up on its own
if desired. We build each sauna reflecting craftsmanship and a well thought out
design. The placement of the orientation of the lights has been proven to give
the best results. We build these units with cedarwood, some non-toxic glue, and
screws. The front panel is tongue and groove cedar planks encased in a cedar outer
picture frame structure crafted by us and have been grooved to hold the front
altogether. The only glue on the front panel is the little bit we use to encase
the boards in the outer picture frame. We cut and glue cedar support rails to
the back of the frame to add strength and create a structure for the rear panel
to sit. The rear panel can be removed and is secured down with screws. The
near-infrared sauna has a carrying handle on the top and hangers on the back.
Each unit has been sanded to have a smooth touch and splinter-free surface. The
front panel is routed to have rounded corners and edges to give it an elegant
look and to help to keep it looking and feeling nice for you. We sand the
corners and borders on the rear panel so you will have a smooth surface all
around the unit. Each unit is wired to produce the least EMF’s and electric
field as possible. We mount the light cages to the front with bolts and by the
porcelain light sockets — the ground plug grounds each light cage for safety
and to lower EMF’s. We test our units for magnetic and electric fields with a
TriField meter model 100XE. We check the sauna in a 4-foot x 5-foot enclosed
space, and the enclosure reaches 130 degrees in about 15 minutes. We do not
recommend sitting any closer than the recommended distance of 18 inches from
the bulbs, and that may not be enough depending on your ability to enduring the
heat from the lamps.
These near-infrared sauna panels are made to order. Please allow up to two weeks before shipping for the manufacturing of this lovely product. In most cases your sauna will ship faster than this period but wood can have it’s hiccups and because we want to deliver you the best craftsmanship we need room for fixing imperfections if needed. We will provide updates with your purchase and project shipping date as the construction of your sauna comes along.