No products in the cart.
-60%
Business & Industrial, Gas & Water Supply Connectors, Hydraulics, Pneumatics & Pump Fittings & Adapters, Hydraulics, Pneumatics & Pumps
BrassCraft CSSL114TE-48 X 1/2 in. MIP x 1/2 in. MIP x 48 in. Gas Connector (3/8 in. O.D.) with Safety+Plus2 Thermal Excess Flow Valve (28,300 BTU)
Availability:
In stock
$41.27 $16.5160% Off
In stock
30 Day Money Back Guarantee with FREE return shipping.
This is an open box item. We go through each item to ensure its unused and complete. If you are not fully satisfied with your order, please reach out to us and we will make it right.
Disclaimer: We have no affiliation with the manufacturer of this product, and although it will come with our “30 Day Money Back Guarantee with FREE return shipping”, It does not come with any additional benefit that the manufacturer offers, including, but not limited to, warranty or quality control standards set forth by the original manufacturer (we are not an authorized reseller).
BrassCrafts Safety+PLUS2 gas connector combines patented excess flow technology and thermal heat activation with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the excess flow valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS EFV automatically resets once the gas line is properly repaired. The thermal component utilizes a thermal ring that will restrict the flow through the valve when the valve is exposed to temperatures of 400F or more. BrassCraft’s stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide complete corrosion resistance.
- Corrugated stainless steel with corrosion resistant coating
- 1/4 in. I.D. (3/8 in. O.D.)
- Connectors and fittings can be used with natural gas, LP gas (propane) and LP gas-air mixtures
- Use to install 4-burner gas ranges, cook-top, dryers and water heaters
- Safety+Plus2 TEFV valve helps protect against fires and explosions
- Valve has no parts that can break or misalign over time for 24/7 protection
- Connector and valve are 100% leak tested
- No special tools required for installation
- ProCoat coating corrosion resistant to most household chemicals, UV rays and salt
- Approved for indoor and outdoor use
- Temperature rating: -20°F to 150°F
- Pressure rating: 1/2 psi maximum
- ANSI Z21.24-2015/CSA 6.10-2015 and ANSI Z21.75-2016/CSA 6.27-2016, ANSI Z21.93-17/CSA 6.30-17
Specifications:
| Condition: | Open Box | Brand: | BrassCraft |
| Model: | CSSL114TE-48 X | MPN: | CSSL114TE-48 X |
| Connection type: | MIP x MIP | Gas Vent Pipe and Fittings Accessory Type: | Gas Appliance Connector |
| Inner material: | Stainless steel | Maximum Pressure (psi): | 0.5 |
| Maximum Working Temperature (F): | 150 | Minimum working temperature (F): | -20 |
| Outer Material: | Other | Remote Access: | No Remote Access |
Shipping Calculation:
Flat Rate Shipping : $10.00
Vendor Information
- Store Name: Warehouse Wonders, LLC
- Vendor: Warehouse Wonders, LLC
- Address: 1500 23rd St S
Suite 1
Moorhead, MN 56560 - (97.8%)★★★★★★★★★★
Review Breakdown:
Item As Described:
★★★★★
★★★★★
Communication:
★★★★★
★★★★★
Shipping Time:
★★★★★
★★★★★
Shipping And Handling Charges:
★★★★★
★★★★★
We offer 30 day, money back guarantee, with FREE SHIPPING!!
